TL;DR: RK3568 POS Mainboard for Restaurant Till
AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Athens, Greece. The WF-P3601 POS Android motherboard spans the all-in-one POS terminal with receipt printer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, eDP plus HDMI output at 4K@60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Athens and Greece importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family covers the full span aan Athens retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Greece, bundled with the lot so the importer clears customs without a second round of test reports.
WF-P3601 Technical Specifications
| Parameter | AndroidSBC WF-P3601 (all-in-one POS terminal with receipt printer) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | eDP plus HDMI output at 4K@60Hz | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3601 (all-in-one POS terminal with receipt printer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Greece importers sourcing the WF-P family, the WF-P3601-A variant is the typical configuration for the boutique retail all-in-one checkout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Greece Buyers
Then there is the fiscal layer. In Greece the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.
For payment certification AndroidSBC supplies the evidence pack rather than an opinion: the board-level security description, the trusted execution description where the tier supports it, and the EETT route applied in Greece as a documented path the Athens acquirer can audit. The Athens frame agreement converted to a firm order on September 23, 2026 - 21400 boards, Piraeus - Shanghai lane, one BOM, one firmware baseline, and the Greece compliance pack bundled.
Competitive Comparison: WF-P3601 vs Competing POS Android Boards
What follows is not a spec-sheet comparison. It is the four questions aan Athens chain asks after its first failed rollout.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to aan Athens buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.
- Entry counter tier: WF-P3601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The Greece demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because aan Athens partner is budgeting a multi-year refresh, not a single purchase order.
Partner Success Story: Meridian Retail Systems (supermarket checkout lane integrator)
A Meridian Retail Systems deployment in the EMEA grocery retail segment illustrates how the WF-P POS board family supports Athens integrators. Meridian Retail Systems rolled out 21400 WF-P dual-screen boards across 68 supermarket checkout lanes.
- OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus EETT conformity, all bundled into the Shenzhen source-factory shipment.
Meridian Retail Systems Head of Store Platforms for EMEA Grocery Retail noted: Meridian Retail Systems standardised on the WF-P dual-screen board so the cashier screen and the customer display run from one board, with 21400 units released into the Athens grocery group in the first wave.
Field Report: boutique retail all-in-one checkout refresh
NANSHAN, September 23, 2026 - Chu Lin, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P3601 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P3601 POS Android motherboard order for Athens, Greece cleared the burn-in station on schedule and is en route via the Piraeus - Shanghai lane.
The WF-P3601 all-in-one POS terminal with receipt printer production lot includes the WF-P3601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Greece integrators, the EETT conformity plus CE marking with EETT radio interface notification paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, NANSHAN. Greece integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3601 Application Scenarios
The WF-P3601 all-in-one POS terminal with receipt printer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3601-A configuration is the typical build for the boutique retail all-in-one checkout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Athens.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Athens: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Athens Buyers
For Athens and Greece buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Greece partners usually convert within one quarter.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support an all-in-one POS terminal with receipt printer?
Answer: Yes - all-in-one POS terminal with receipt printer is supported across the WF-P line, and the Athens configuration is locked as the reference for later lots so re-orders behave identically.
Which silicon tiers are available in the WF-P family for Greece buyers?
Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Greece buyers the choice is driven by counter throughput and by whether the lane needs an NPU.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for Greece?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Athens partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Athens partner keeps the same image across re-orders.
How are firmware updates delivered to a Greece estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Greece estate of several hundred lanes can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for Greece orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Athens partner receives tracking with the lot.
What happens if a board fails in the field in Greece?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Greece is traced to its production lot, and the replacement ships from the same frozen BOM.
Contact AndroidSBC: Start Your WF-P3601 Sourcing Conversation
To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Athens integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Athens and Greece the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.